Tricity Bendix TBG640WH Manuel d'utilisateur télécharger pdf (Page 10)

Fitting the Hob into the worktop

Carry out the building in of the hob as follows:

• put the seals supplied with the hob, on the

edges of the cut out, taking care that the seals

meet without overlapping;

• place the hob in the cut out, taking care that it

is centred;

• fix the hob with the relevant fixing clamps and

screws, as shown in the diagram. When the

screws have been tightened, the excess seal

can be removed.

The edge of the hob forms a double seal which

prevents the ingress of liquids.



FO 0199

a) Sealing gasket

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Tricity Bendix TBG640WH Manuel d'utilisateur Page 10